cb360

Any thoughts on the noise going on, it’s near the top end. I’ve already checked for the recall and i’m good since I have the dots, adjusted valves and cam chain tensions. Any thoughts?

Guys, I had to take a step back and think about the issues pods present and how the bike responds..... this is what I have just figured out and is running amazingly with cheap pods, aftermarket secondaries, and accidentally acquired needs! To refresh, i have two other threads... a build and...

Hey guys! I’ve got a thread open currently for my CB 360 build, but that’s more for pictures and progress. I’ve got it all back together after being in several pieces while rebuilding the top end and building a custom harness. I’ve done custom harnesses before, so I don’t think the electrical...

Sup guys! I joined a few months back when I scooped up a barely running 360 that smoked and sputtered the entire way home lol I ran out of gas, had to limp it on one cylinder and took me about 3 hours to ride it back home from 20 miles away. Turns out the carb boots were ripped and it couldn't...

Hi, I bought a CB360T a couple years ago and it came with a spare frame. Kept it inside until the last few months when a move forced it into the backyard. Was planning on selling it but would rather give it away to someone who can use it. Can include front forks as well, plus what you see in the...

I am having a few electrical issues, and I am honestly not sure if I am misunderstanding something, or overlooking something or really overthinking it. So kinda just looking for general guidance on what to check for two things.... 1. New 4into1 Key switch - starter works in accessory? but not...

Hey Everyone, So last week I took my bike out for a ride and while I was cruising along at ~30 mph I heard an unfortunate noise from the engine and my bike completely shut down mid ride. I was able to coast into a parking lot and ended up having to have the bike towed back to my house. I...

I'm fixing up a 360 and took it to a mechanic for new tires and ignition timing and he pointed out a few more things that should be fixed on the bike. The bike is pulling 12.5V at the battery and 11.9V going into the coils. Mechanic recommended upgrading tail light bulb and possibly turn signal...

Hey Everyone! I got a little carried away in my new member post so a lot of this is a repost of what I put in there, but I've tried to a little more info here. I just picked up a ‘76 CB360T last week and I’m planning to do the following maintenance on it, fortunately it runs right now but it’s...

The fuse box I have on the 1975 CB360T I bought a couple months ago is looking pretty rough. The fuses are also mismatched and should be replaced so I figure I should replace the box as a whole while I'm at it.

Hi, not sure if this it the right place for this post, let me know if I should move it I bought a 1975 Honda CB360T, my first bike, and I'm diving into wrenching. I have it running now, but it's rough. Exhaust on the right side is sputtering and misfiring (I think that's the term for it). Is...

Does anyone know where to get hex green metallic paint? i have a 1974 CB360 that needs repainting and i am having issues finding the original color. if anyone has any idea where to get it please let me know!

I bought a new caliper from 4-into-1 in 2019 and it has worked well, although the brake often squeaks when I apply it lightly at low speed, e.g., when I'm just about stopped at an intersection or when I'm rolling the bike out of my garage. I don't hear it squeaking when braking at higher speeds...

We are very happy to partner with VintageHondaTwins! We have Mikuni Honda Carburetor Kits today! These high quality Mikuni carburetor kits are jetted correctly to your bike. One of the best things you can do for your motorcycle is to upgrade those stock carburetors. Q. Why is your kit better...

I recently bought a shockwave from those guys in Houston to put on my bike. Unfortunately, I don’t have an ignition/mechanical/timing advance. Does anyone happen to have one laying around? I’m located in CA - willing to pay shipping. Thanks in advance!

The purpose of this thread is to explore the source of excess oil in the points area on my 1974 CB360G. Thank you to 66Sprint and ancientdad for coaxing me to start the thread after seeing evidence of the oil in a photo I posted recently. In way of background, I would like to mention that I...

Hi, Oddly specific question for my 1976 CB360T here. Finally getting ready to install the headlight which means I need to sort out the remainder of the ratsnest of wires hanging in between the front forks. I've figured everything out so far. Only thing I'm uncertain about is where this green...

Have two questions, one regarding the flasher relay and one regarding the starter. 1) So I was trying to determine where the signal flasher relay was located on my 360 and I found these two wires (black and gray) that are just hanging off the wiring harness, not attached to anything. Upon...

Hey all, sorry if this is a dumb question but I'm pretty new to this and trying to get my bike running. The person I bought my 1974 CB360G from had removed the points plate and spark advancer, and replaced them with a Pamco unit with e-advance. That ended up being the reason the bike isn't...