CL77 305 type 1 engine new regulator/rectifier not charging.

[joeclampitt89@gmai]

I have a cl77 305cc on a chopper, just got a voltage regulator/rectifier from 4 into 1 and it does not seem to be working. The stator wires are pink, yellow, and brown. Do i use the brown and pink wires to input on the regulator? I am getting different answers on the internet.

 

[ballbearian]

I have a cl77 305cc on a chopper, just got a voltage regulator/rectifier from 4 into 1 and it does not seem to be working. The stator wires are pink, yellow, and brown. Do i use the brown and pink wires to input on the regulator? I am getting different answers on the internet.

Pink from stator goes to the DY on the key switch. Yellow and brown to reg/rec. The reg/rec probably has a red for batt/positive and a black for volt sensing, tie it to switched power like the brake switch power.

 

[joeclampitt89@gmai]

Pink from stator goes to the DY on the key switch. Yellow and brown to reg/rec. The reg/rec probably has a red for batt/positive and a black for volt sensing, tie it to switched power like the brake switch power.

Yeah this is a chopper, no original harness, wired with just bike and lights on or off. The brown, yellow, and pink wires are what I am trying to figure out. I test them with the bike running and get 35v AC output between brown and yellow, also between pink and brown but nothing from pink to yellow.

 

[RobMan]

Here is a link to a tutorial on testing the alternator that should help: https://www.vintagehondatwins.com/f...cture-4-testing-the-alternator.382/#post-2615

Also I saw that you tested brown and yellow and then yellow and brown which are the same pairs and with AC current would read the same, 35 volts. Did you test the pink and brown pair?

 

[joeclampitt89@gmai]

Here is a link to a tutorial on testing the alternator that should help: https://www.vintagehondatwins.com/f...cture-4-testing-the-alternator.382/#post-2615

Also I saw that you tested brown and yellow and then yellow and brown which are the same pairs and with AC current would read the same, 35 volts. Did you test the pink and brown pair?

Pink and yellow i get zero, brown and pink i get 35

 

[mike in idaho]

Combine the pink and yellow wires for one leg of the a/c connection, brown wire to the other a/c connection.

 

[joeclampitt89@gmai]

Combine the pink and yellow wires for one leg of the a/c connection, brown wire to the other a/c connection.

Thats how I have it now but I am only getting 12.8 V which isn't much above battery voltage..... probably an issue with the stator?

 

[joeclampitt89@gmai]

Combine the pink and yellow wires for one leg of the a/c connection, brown wire to the other a/c connection.

Thats how I have it now but I am only getting 12.8 V which isn't much above battery voltage.....