Tool for opening wiring multi plugs

[Windmill John]

In the past, I might have used a tiny screwdriver or the like to remove a wire from a multi plug. But, if I want to start pulling apart more multi plugs, are there recommended by you guys, little tools or tips to make it easier?
Also, links to decent Japanese bullet connectors. I am in the UK, so I guess vehicle wiring products will be the shop for connectors.
Cheers

 

[stl360+450]

Take a look at these posts/threads.

https://www.vintagehondatwins.com/forums/threads/stator-harness-grommets.7574/post-140294

https://www.vintagehondatwins.com/f...-and-crimping-tool-in-the-uk.9141/post-107378

 

[Windmill John]

Thanks for the links, some reading for this evening

 

[MrPepper]

I use a harbor freight metal pick and it gets the job done for most connectors I've come across on Hondas and other. Recently I took apart an extremely complicated harness (Harley bagger with radio and all the add ons) to scavenge the wires and connectors and all I used was the metal pick and a small screw driver

 

[stl360+450]

The tool shared by fxray in the link I posted above is nice because it also works with different sizes of round connectors, like the key switch plug for the 350/450, in addition to the rectangular block connectors.



I had used a flat blade screwdriver prior and felt that sometimes that involved a bit of unnecessary gouging or distorting of the plastic.

 

[Windmill John]

Looks like they’re all copies in the UK

https://www.ebay.co.uk/itm/331684034679?_ul=GB&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5339019731&toolid=10001&customid=eb%3Ag%3Avms%3Aeb%3Ap%3A331684034679%3B%7BGCLID%7D&_trkparms=ispr%3D1&amdata=enc%3A12YlDOoYnQcmykLwqSH56_Q35&adtype=pla&loc_interest_ms=&loc_physical_ms=1006755&gbraid=0AAAAADmMgijPC3Zzne5DlaCQaT0oBJVrF&gclid=CjwKCAjw6f3RBhApEiwAMaCqWYJMfuD5Xdgyf0rVcAHv8JC0A1ucJPdSAfZdAkK1XNHgPT-AUHChtBoC5P8QAvD_BwE