Front forks CA95

[Pop]

Hi has anyone changed the standard ca95 150cc 1964 front forks to telescopic ones off a different bike something like a CB , if so what did they come off ???? . Thanks

 

[ballbearian]

Not that I know of. Would be a lot of trouble and probably lose the stock front fender.

 

[crazypj]

You could probably fit complete front end off just about anything around the same weight.
Most likely CB350/360/350F/400F would be straight swap and you can probably use original front wheel with new spacers.
Have your forks rotted out?

 

[ballbearian]

You could add an external set of quad shocks forward of the hollow forks like the Japanese BOBL racers.

 

[Pop]

You could probably fit complete front end off just about anything around the same weight.
Most likely CB350/360/350F/400F would be straight swap and you can probably use original front wheel with new spacers.
Have your forks rotted out?

Hi thanks for the info I will look into that .
The forks in the bike are slightly bent on one side but bike isn’t standard, rear mug guard has been cut off at sometime, different tank , different front mud guard , handle bars . It came in a box so was just going to make it a bit different. Thanks Chris