front End Swap?

[Kungfutoast]

HI Everyone,
I am looking to experiment with my CB200. It's a chopper in progress. I'd like to swap the front end with something a little longer and add a disc brake. Aiming for 4 inches over but am open really. Fork tube diameter could for sure go for some more girth too.

Who has done a triple tree swap? What head set will easily convert with just a bearing swap? I'd love some feedback.

Thanks yall

 

[Alan F.]

Have a look here: https://www.allballsracing.com/forkconversion

How about bolting up a VT600 front end?

I don't know how the steering stem lengths compare, but if you swap steering stems it'll bolt up, then look at steering stops....

 

[66Sprint]

Rebel 250 forks, Wheel, etc, with swapped stem........Got "the look" already.....

OR, you can just do it visually......BOTH Honda 100's in the picture below have
STOCK fork legs in stock triples (front ends are identical, original length)

Sorry about the 53 year old Polaroid.....

Actual changes were:
removed upper fork covers and replaced with chromed sink drain tube,
+4" handlebar risers, 8" Z bars, high mount headlight
"Frisco" mounted "peanut" tank, "bobbed" fender

NO changes to steering geometry, so it still handled well.......

 

[Kungfutoast]

thats rad! Thank you both for the insights. I'll hit up my local shop and see what they have. I'm pretty excited to get this thing build.
View attachment 3401