CB72/77 Yetman Frame

km125motos

Member
Joined
Jul 12, 2020
Total Posts
43
Total likes
47
Location
Milwaukee, WI USA
Picking this up at Mid-O this year. Learned from a friend that Yetman made a street and race version. This frame has horn mounted so likely it's a street frame.

Does anyone have information on the differences between street vs race Yetman frames?
 

Attachments

  • Yetman Frame (3).jpg
    Yetman Frame (3).jpg
    164.6 KB · Views: 12
  • Yetman Frame (1).jpg
    Yetman Frame (1).jpg
    227.7 KB · Views: 12
  • Yetman Frame (2).jpg
    Yetman Frame (2).jpg
    162.6 KB · Views: 12
Check out the yetman info on the tz owners forum. Yetman sez the difference is 1) the width of the junction between the tubes under the tank and under the seat is smaller on the street (as I recall, about 3in on street and 6in on race frame. The tubes on the street frame were heavier than on the race frame.
 
Check out the yetman info on the tz owners forum. Yetman sez the difference is 1) the width of the junction between the tubes under the tank and under the seat is smaller on the street (as I recall, about 3in on street and 6in on race frame. The tubes on the street frame were heavier than on the race frame.

Yes, I found the site and info a while after making the original post. I'll drop the link here in case someone else needs it in the future

 
Back
Top Bottom