'72 CB350 F-25 Frame body spacer / bolt / 2 clampers

[John72]

I am ready to install the motor but I am unable to find the #4 Collar, Engine Side, 50329-286-010, on page 123 of the K4 manual. I've searched for days and waving the white flag. I've also searched on line but to no avail. I have it some where but . . . Does anyone have one to sell or will someone be able to send me the measurements and I'll have on fabricated.

I also unable to find the #17 Bolt, Hex 8x85, 92000-08085-OA, for the upper hanger mount. I searched on line and . . .

I am thinking using a standard bolt in lieu of metric. Has anyone done this?

Also, last one, the two #1 Clamper, high tension cord, 32957-317-000. Can't find these either in the shop or online. Do I need these?

I upset becasue I know they are here and I had put everything in bags and boxes and marked everything, I'm obsessive and compulsive about organization in this matter. I feel better now, lol

As always I appreciate any help!

Thanks in advance!

 

[boddy]

Another member had the same issue with the spacer, here is a link to the dimensions


Edit: for the bolt, if you search for a longer bolt, you could cut it to size - try 92000-08090

 

[EzPete]

For the bolt, you can always pick this one up at any Honda auto dealer (save on shipping)

95701-08085-08 - Genuine Honda Bolt, Flange (8X85)

HondaPartsNow.com offers the great deal for genuine Honda parts, 957010808508. Bolt, Flange (8X85) for $2.22. All parts are backed by the Honda's warranty.

www.hondapartsnow.com

The cable clamps for the HT leads are arguably the most agile of all bagged and tagged parts. Rumor has it they have all migrated to their own island. They’re pretty easy to eyeball fabricate from some thing gauge steel. Not exactly a must have but they do make it look cleaner and help your wires and caps last longer by limiting vibration and accidental tugs.

I did see that nospartsnow.com has a NOS collar in stock. If you want to go the fabrication route, this thread has a good set of measurements.

Engine mount spacer

Good afternoon, I am missing this part from my ‘73 CL350. It is pretty much unavailable everywhere. Was wondering if someone could provide the dimensions of this spacer so I can try and find an alternative or fabricate a replacement. Many thanks.

www.vintagehondatwins.com